Used Bikes@The Rusty Crank

Fuji del Ray

New tires, cables and grips complete this restoration. Drive is a 2 x 5 (10 speed) with very reliable downtube mounted friction shifters that will work with almost any derailleur/drive components. Its original SunTour ARX derailleurs still work like new. The chain and freewheel were replaced very recently and measure no wear.

The frame is made with Fuji's "quad-butted VALite" tubing. It is dark green with a few primer gray touch up spots. 

The wheels are vintage 27 inch and very true. The front is original and the rear is a recent replacement.

The original drop bar was not salvageable so we 'hybridized" it with a flat bar set up.

Center to center frame dimensions are 63cm for seat-tube and 59cm top-tube. The bike weighs 27 pounds - pretty good for a largest production size steel frame.

Trek 660 Custom 1-Speed

Another frame-up restoration. The headset & bottom bracket are very good original ones and they are in excellent condition - as is the Reynolds 531 frame. 

Except for the vintage Look pedals and OEM seatpost, all other components are new. The price is essentially a sum of the new parts including:  cartridge bearing wheels (flip-flop rear), stainless 40t chainring, Shimano 16t freewheel, Connex 3/32 chain, Ultegra calipers, Tiagra controls, and Ritchey Comp Logic II bar - white like the frame.

Center to center frame dimensions are 56cm for both seat and top tubes.

Bianchi 928 Carbon RC

Ultegra 10 speed drive system (105 FD) - Mavic Ksyrium Equipe wheels - Thompson seatpost and stem - Ultegra clipless (PD-6600) pedals.

The bike has been given a complete overhaul including re-worked cassette body - had typical Mavic gummy ratchet, but works like new now. The rim brake surfaces show little wear and are very true.

Parts replaced - new:

• Chain & cassette
• Bottom bracket
• Tires - 23mm Front 25mm Rear
• All cables & housing
• Front brake pads
• Handlebar tape

Center to center frame dimensions are 53cm for seat-tube and 56cm top-tube (effective). The bike weighs 19 lbs-1 oz including 2 bottle cages.

Schwinn Breeze 24" 3spd

This vintage bike has a Sturmey-Archer S3C 3speed coaster brake hub - with 5/71 stamped as manufacturing date. The coaster brake works well but squeals as a result of disuse. The noise will likely diminish with use - or you can consider it an audible braking indicator.

The Breeze got new tires 2 years ago along with a thorough tune up, with almost no use since then.  And we just now installed a new shifter, cable and indicator chain.

The 24"-wheeled frame is a pretty small "step-through": 16" seat tube; 19" effective top tube.

They don't makem like this anymore

Specialized Dolce Comp

This 44cm bike is in near perfect condition. It just had a major service including a rear hub overhaul and new tires. The chain shows no measurable wear. 

Parts include: Shimano 10-speed 105 shifters and derailleurs, FSA Gossamer compact crankset, and Specialized's own Axis wheels and brake calipers. 

Masi CXGR Supremo 

From 2019, this 58cm fashionably gravel-friendly specimen is in excellent condition. A just completed major service required no parts and the chain measures no significant wear. 

The original dropper seatpost has been replaced with a lighter, maintenance-free Whisky No.7 Alloy. An included Axiom Streamliner 29er DLX rear rack allows pretty big tires and loads.

Bianchi Ocelot    

This bike came to us missing quite a few parts. It has been re-assembled with many new ones including: rear wheel, cassette, chain, bottom bracket, crank, pedals, both brake calipers, all cables, and rubber.

Reid Ares 

Fat Bike frame size - L. This Bike is in nearly new condition - has seen very little use. No measurable chain wear, tires still have hairs on them. It has Deore and XT derailleurs, Tektro HDC 330 hydraulic brakes, and 26 X 4.0 tires.