Lighting

Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters

Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g

Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement

Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash

These small, simple lights are essential for safety when riding between dusk & dawn—and they're water resistant for when you're racing against the weather. - Simple mode selection: on, off, flashing - Universal attachment (fits 20–40mm diameter tubes) - Output: 17 lumens - Run time: 50 hours (steady), 150 hours (flashing)

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Keep your favorite lights running bright with Serfas' Bat-4 Replacement Battery. It is included with TSL-2500 and TSL-Police lights but fits several other models as well.

The newest top-of-the-line Flux headlight continues the Flux tradition of optimal beam pattern, wide variety of mounting options, and super rugged construction. Compared to the Flux 1200, the Flux 1250 increases lumens and runtime, throws in the helmet and camera-style mounts, while dropping the price. BOOM! Mode Shift user interface gives you three steady modes for just the right mix of lumens and runtimes to match riding conditions. Press-and-hold to enter the secondary modes, where you will find a Steady Flash mode for increased visibility in urban conditions, a Flash mode for daytime use, and 10 and 20 hour flashlight modes for bikepacking conditions, or when you forget to recharge and need to maximize the last few percent of battery life. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - Latest CREE XP-L High Intensity LEDs combines XM-L level of output in a tighter 3.5mm package for maximum lumens with better beam pattern control. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Also includes helmet mount and action camera style mount to give you every option to blow up the night. - Premium 3400mAh Li-ion internal battery is USB rechargeable via micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 1250 lumens for 1:30 hours - Steady Medium mode: 600 lumens for 3:00 hours - Steady Low mode: 300 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 300 lumens for 4:00 hours - Daytime Flash mode: 450 lumens for 20:00 hours - Very low mode: 120 lumens for 10:00 hours - Super low mode: 60 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.